{"product_id":"bently-nevada-330907-05-30-05-02-cn-industrial-automation-module","title":"Bently Nevada 330907-05-30-05-02-CN Industrial Automation Module","description":"\u003ch2\u003eIntroduction to the Bently Nevada 330907-05-30-05-02-CN\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330907-05-30-05-02-CN\u003c\/strong\u003e is a 3300 NSv Reverse Mount Probe engineered for demanding industrial vibration monitoring. This Industrial Automation Module delivers reliable shaft vibration and position measurement in harsh environments, particularly where chemical resistance is critical. With its side-view design and robust construction, the 330907-05-30-05-02-CN outperforms traditional probes in process compressor applications.\u003c\/p\u003e\u003cp\u003ePart of the proven 3300 NSv series, this reverse mount probe features M10X1 threads, a 0.5 meter (20 inch) total length, and a miniature coaxial ClickLoc connector with standard cable. The country-specific agency approval (CN) ensures compliance for targeted regions. Manufactured in the U.S.A., this probe is built to exacting Bently Nevada standards.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications Breakdown\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330907-05-30-05-02-CN\u003c\/strong\u003e offers precise measurement capabilities backed by clearly defined parameters. Below are the key specifications from the manufacturer:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC Resistance (RPROBE)\u003c\/td\u003e\n\u003ctd\u003e4.0 ± 0.5 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (60 mils) from 0.25 to 1.75 mm (10 to 70 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Gap Setting\u003c\/td\u003e\n\u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Probe Case Torque\u003c\/td\u003e\n\u003ctd\u003e22.6 N•m (200 in•lb) rated; 7.5 N•m (66 in•lb) recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Weight (Probe)\u003c\/td\u003e\n\u003ctd\u003eApproximately 14 to 150 g (0.5 to 5.3 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThe linear range of 1.5 mm (60 mils) starts at approximately 0.25 mm (10 mils) from the target, providing a wide measurement window. The recommended gap setting of 1.0 mm (40 mils) ensures optimal performance. The probe operates across an extreme temperature range from -52°C to +177°C, making it suitable for severe industrial environments.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330907-05-30-05-02-CN\u003c\/strong\u003e excels in applications where chemical exposure is a concern. Compared to the 3300 RAM probe, the NSv variant offers enhanced chemical resistance, making it ideal for process compressor installations. Typical use cases include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProcess compressors in petrochemical plants\u003c\/li\u003e\n\u003cli\u003eTurbo machinery vibration monitoring\u003c\/li\u003e\n\u003cli\u003eShaft position and eccentricity measurement\u003c\/li\u003e\n\u003cli\u003eRefinery and gas processing equipment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn these settings, the probe's side-view characteristics provide superior gapping accuracy compared to 3000-series 190 probes, even at the same distance from the target. This reliability translates into reduced downtime and improved machine protection.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation of the \u003cstrong\u003e330907-05-30-05-02-CN\u003c\/strong\u003e is crucial for accurate readings. The probe uses M10X1 threads with a maximum thread engagement of 15 mm. When mounting, apply the recommended torque of 7.5 N•m (66 in•lb) to avoid damaging the probe case. The ClickLoc connector locks securely, preventing loosening during operation.\u003c\/p\u003e\u003cp\u003eFor field wiring, use a three-conductor shielded triad cable. The acceptable wire gauge ranges from 0.2 to 1.5 mm² (16 to 24 AWG), or 0.25 to 0.75 mm² (18 to 23 AWG) when using ferrules. Keep the cable length between the Proximitor Sensor and monitor to a maximum of 305 meters (1,000 feet) to minimize signal degradation.\u003c\/p\u003e\u003cp\u003eEnsure the probe tip is positioned at the recommended gap of 1.0 mm (40 mils) from the target surface. Calibrate the system according to the frequency response graphs (Figure 16 and Figure 17) if longer wiring lengths are used.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330907-05-30-05-02-CN\u003c\/strong\u003e is designed for long service life with minimal maintenance. Its AISI 304 stainless steel case and PPS tip resist corrosion and chemical attack. The patented TipLoc molding method provides a robust bond between the probe tip and body, reducing the risk of mechanical failure.\u003c\/p\u003e\u003cp\u003eRegular inspection should include checking the probe cable for damage and verifying that the ClickLoc connector remains securely locked. Avoid exposing the probe to temperatures below -34°C (-30°F) for sustained periods, as this may cause premature failure of the pressure seal. The Viton O-ring sealing material maintains differential pressure integrity between the probe tip and case.\u003c\/p\u003e\u003cp\u003eBy following these simple maintenance practices, you can extend the operational life of the probe and avoid costly unscheduled downtime.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen selecting a replacement or upgrade for your vibration monitoring system, verify that the \u003cstrong\u003e330907-05-30-05-02-CN\u003c\/strong\u003e matches your existing Proximitor Sensor and monitor requirements. The probe's 0.5 meter (20 inch) cable and miniature coaxial ClickLoc connector are standard, but confirm compatibility with your system's field wiring.\u003c\/p\u003e\u003cp\u003eConsider the environmental conditions of your installation, including temperature, pressure, and chemical exposure. The 330907-05-30-05-02-CN is optimized for process compressor applications, but its robust design suits various industrial settings.\u003c\/p\u003e\u003cp\u003eFor reliable sourcing, PLC Source PRO offers genuine Bently Nevada components with verified specifications. Ensure you order the exact part number to guarantee proper fit and performance.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482775679075,"sku":"330907-05-30-05-02-CN","price":293.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330907-05-30-05-02-05_7315cc0e-64e2-46f6-80a9-ee437d7af86a.jpg?v=1786826032","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-330907-05-30-05-02-cn-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}