{"product_id":"bently-nevada-330904-00-10-50-02-00-industrial-automation-module","title":"Bently Nevada 330904-00-10-50-02-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen precise shaft vibration and position monitoring are critical, the Bently Nevada 330904-00-10-50-02-00 delivers reliable performance. This 3300 NSv proximity probe is designed for industrial machinery protection, offering enhanced chemical resistance and superior side-view characteristics compared to earlier models. The probe is part of the 3300 NSv series and is fully compatible with existing Bently Nevada 3300 RAM systems.\u003c\/p\u003e\u003cp\u003eThe 330904-00-10-50-02-00 features an M8x1 threaded case with armor, a 100 mm overall case length, and a 5.0 meter (16.4 feet) total length with a miniature coaxial ClickLoc connector. It operates over a wide temperature range and provides accurate measurements for rotating equipment such as compressors, turbines, and pumps.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eProbe tip material: Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003eProbe case material: AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eLinear range: 1.5 mm (60 mils) from 0.25 to 1.75 mm\u003c\/li\u003e\n\u003cli\u003eIncremental Scale Factor (ISF): 7.87 V\/mm (200 mV\/mil)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 0 to 10 kHz (+0, -3 dB) with up to 305 m field wiring\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -52°C to +177°C\u003c\/li\u003e\n\u003cli\u003eMaximum torque: 0.56 N•m (5 in•lb)\u003c\/li\u003e\n\u003cli\u003eMinimum bend radius: 25.4 mm (1.0 in)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe dc resistance (5.0 m)\u003c\/td\u003e\n\u003ctd\u003e5.3 ± 0.7 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension cable dc resistance (center conductor)\u003c\/td\u003e\n\u003ctd\u003e0.220 Ω\/m (0.067 Ω\/ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension cable dc resistance (shield)\u003c\/td\u003e\n\u003ctd\u003e0.066 Ω\/m (0.020 Ω\/ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension cable capacitance\u003c\/td\u003e\n\u003ctd\u003e69.9 pF\/m (21.3 pF\/ft) typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eField wiring\u003c\/td\u003e\n\u003ctd\u003e0.2 to 1.5 mm² (16 to 24 AWG), three-conductor shielded triad, max 305 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended gap setting\u003c\/td\u003e\n\u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeviation from best fit straight line (DSL)\u003c\/td\u003e\n\u003ctd\u003eLess than ±0.06 mm (±2.3 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget size (flat target)\u003c\/td\u003e\n\u003ctd\u003eMinimum 8.9 mm diameter, recommended 13 mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe cable\u003c\/td\u003e\n\u003ctd\u003e75 Ω coaxial, FEP insulated, lengths 0.5, 1, 5, or 7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe case thread\u003c\/td\u003e\n\u003ctd\u003eM8x1, max thread engagement 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector-to-connector torque (M8X1)\u003c\/td\u003e\n\u003ctd\u003eMaximum 7.3 N•m, recommended 5.1 N•m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThis 330904-00-10-50-02-00 probe excels in process compressor applications where chemical resistance is essential. Its increased chemical resistance compared to the 3300 RAM probe allows reliable operation in harsh environments. The probe also performs well for axial position measurements on shafts, provided the shaft diameter is at least 13 mm (0.5 in). For smaller shafts, scale factor changes can occur; reducing the gap helps mitigate this effect.\u003c\/p\u003e\u003cp\u003eTypical applications include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCentrifugal and reciprocating compressors\u003c\/li\u003e\n\u003cli\u003eSteam and gas turbines\u003c\/li\u003e\n\u003cli\u003ePumps and motors\u003c\/li\u003e\n\u003cli\u003eGenerators and gearboxes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eMount the probe with the recommended torque: finger tight for the probe tip, and for the probe case use a maximum of 7.3 N•m (65 in•lb) with a recommended 5.1 N•m (45 in•lb). Ensure the unthreaded length is set to 00 mm and the overall case length is 100 mm as specified. When routing the cable, maintain a minimum bend radius of 25.4 mm (1.0 in) to avoid damage.\u003c\/p\u003e\u003cp\u003eFor field wiring, use a three-conductor shielded triad cable with conductor sizes from 0.2 to 1.5 mm² (16 to 24 AWG). If using ferrules, the recommended range is 0.25 to 0.75 mm² (18 to 23 AWG). The maximum distance between the Proximitor Sensor and the monitor is 305 meters (1,000 feet). Consult the frequency response graphs for signal rolloff at high frequencies with longer wiring.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eRegularly inspect the probe cable and connector for wear or damage. The PPS tip and stainless steel case offer excellent durability, but verify the O-ring seal (Viton) if the probe is subjected to differential pressure. The probe is not pressure tested before shipment; contact the custom design department if pressure testing is required for your application.\u003c\/p\u003e\u003cp\u003eKeep the target surface clean and free from debris to maintain accurate readings. Periodically check the gap setting and recalibrate if necessary. With proper care, this probe provides long-term reliable service.\u003c\/p\u003e\u003ch2\u003eCompatibility \u0026amp; Integration\u003c\/h2\u003e\u003cp\u003eThe 330904-00-10-50-02-00 is mechanically and electrically compatible with Bently Nevada's previous 3300 RAM proximity probe and extension cable. It works seamlessly with 3300 XL NSv Proximitor Sensors and existing monitoring systems. The miniature coaxial ClickLoc connector ensures a secure and stable connection.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore ordering, verify that the 5.0 meter total length and M8x1 thread configuration meet your installation requirements. Confirm the unthreaded length (00 mm) and overall case length (100 mm) are suitable. PLC Source PRO offers this Bently Nevada 330904-00-10-50-02-00 module as new and original in factory packing, backed by a 12-month factory warranty.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482139095139,"sku":"330904-00-10-50-02-00","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330904_202_5cf942db-d32a-4138-872a-3b38c2626073.jpg?v=1786794503","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-330904-00-10-50-02-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}