{"product_id":"bently-nevada-330191-00-33-20-00-industrial-automation-module","title":"Bently Nevada 330191-00-33-20-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen probe tip detachment or cable pull failures compromise machine monitoring, the \u003cstrong\u003eBently Nevada 330191-00-33-20-00\u003c\/strong\u003e provides a robust solution. This 8 mm proximity probe, part of the 3300 XL series, uses patented TipLoc molding to bond the tip to the body and CableLoc technology for 330 N (75 lbf) pull strength. It is designed for non-incendive circuits and provides reliable displacement sensing in turbine, compressor, and pump applications.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330191-00-33-20-00\u003c\/strong\u003e is configured as a 2.0-meter (6.6 ft) total length probe with 3.3-inch case length and 3\/8-24 UNF thread, without armor. Key parameters include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement:\u003c\/strong\u003e -17.5 Vdc to -26 Vdc (non-incendive circuit), -23 Vdc to -26 Vdc with barriers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Sensitivity:\u003c\/strong\u003e Less than 2 mV change in output voltage per volt change in input voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Resistance:\u003c\/strong\u003e 50 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance (RPROBE):\u003c\/strong\u003e 7.88 ± 0.50 Ω at 2.0 m probe length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 303 or 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Connector Torque:\u003c\/strong\u003e 0.565 N•m (5 in•lbf)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range (Probe Only):\u003c\/strong\u003e -55°C to +232°C (T1) down to -55°C to +40°C (T5) for EPL Ga\/Gc\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330191-00-33-20-00\u003c\/strong\u003e excels in critical rotating machinery monitoring. In steam turbines, the 8 mm probe’s thicker PPS encapsulation resists physical abuse from moisture and debris. For large centrifugal compressors, the patented FluidLoc option prevents oil leakage along the cable, reducing false alarms. The 2.0-meter length suits close-coupled installations where space is tight.\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cp\u003eMount the \u003cstrong\u003eBently Nevada 330191-00-33-20-00\u003c\/strong\u003e with hand-tightening to 0.565 N•m (5 in•lbf) maximum torque on the connector. Use the 3\/8-24 UNF thread with 0.563-inch max engagement. For non-incendive wiring, follow drawing 140979 and ensure power is within -17.5 Vdc to -26 Vdc. One-meter systems do not require an extension cable; for longer runs, pair with 3300 XL extension cables. The Viton® O-ring seals differential pressure, but probes are not pressure-tested before shipment.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eTo maximize service life of the \u003cstrong\u003eBently Nevada 330191-00-33-20-00\u003c\/strong\u003e, inspect the probe tip and cable for wear after each major outage. The stainless steel case resists corrosion in most industrial environments. Avoid operating below -23.5 Vdc, as this reduces linear range. The 75 Ω triaxial cable (FEP or PFA) should be protected from sharp bends. The cable’s 330 N pull strength minimizes breakage, but regular visual checks of the connector are recommended.\u003c\/p\u003e\u003ch2\u003eSelection Guide\u003c\/h2\u003e\u003cp\u003eWhen ordering the \u003cstrong\u003eBently Nevada 330191-00-33-20-00\u003c\/strong\u003e, verify your total probe length (2.0 m in this variant), unthreaded length (0.0 in), and agency approval option (none selected). For applications with oil ingress, specify the FluidLoc cable option. For extended temperature ranges, choose PFA-insulated cable. PLC Source PRO stocks this genuine Bently Nevada part with factory warranty, ensuring you receive a new, original product in factory packing.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44426611032163,"sku":"330191-00-33-20-00","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330191_202-10_10b599c3-e014-43d8-a493-3d7f10a4a1a5.jpg?v=1785449753","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-330191-00-33-20-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}