{"product_id":"bently-nevada-330173-00-04-10-02-00-industrial-automation-module","title":"Bently Nevada 330173-00-04-10-02-00 Review \u0026 Technical Details","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330173-00-04-10-02-00 is a 3300-series 5mm proximity probe with an M8 x 1 thread and a 1.0 metre cable. This without-armor configuration is designed for close-coupled vibration measurement in industrial rotating machinery. The probe tip is molded from polyphenylene sulfide (PPS), and the case is machined from AISI 304 stainless steel, providing stable, repeatable proximity sensing in demanding environments.\u003c\/p\u003e\u003cp\u003eThis unit is manufactured in the U.S.A. and includes a miniature coaxial ClickLoc connector. The part number decodes as follows: 0 mm unthreaded length, 40 mm overall case length, 1.0 m total length, standard cable, and no agency approval required.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe following specifications apply to a proximity transducer system operating between +18°C and +27°C with a -24 Vdc supply, a 10 kW load, an AISI 4140 steel target, and the probe gapped at 1.27 mm (50 mils).\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003e3300 5mm Probe, M8 x 1 thread, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded length\u003c\/td\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall case length\u003c\/td\u003e\n\u003ctd\u003e40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal length\u003c\/td\u003e\n\u003ctd\u003e1.0 m (3.3 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe tip material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe case material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.323 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply requirement\u003c\/td\u003e\n\u003ctd\u003e-17.5 Vdc to -26 Vdc at 12 mA maximum consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply sensitivity\u003c\/td\u003e\n\u003ctd\u003eLess than 2 mV output voltage change per volt input change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput resistance\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC resistance (1.0 m)\u003c\/td\u003e\n\u003ctd\u003e7.59 ± 0.50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe cable\u003c\/td\u003e\n\u003ctd\u003e75 Ω triaxial, FEP insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector material\u003c\/td\u003e\n\u003ctd\u003eGold-plated brass or gold-plated beryllium copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e222 N (50 lbf) probe case-to-lead and lead-to-extension-cable connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe case torque\u003c\/td\u003e\n\u003ctd\u003e5.1 N·m recommended, 7.3 N·m maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector-to-connector torque\u003c\/td\u003e\n\u003ctd\u003e0.565 N·m maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum cable bend radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe temperature range\u003c\/td\u003e\n\u003ctd\u003e-35°C to +177°C (-31°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread engagement limit\u003c\/td\u003e\n\u003ctd\u003eM8 x 1, maximum 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cp\u003eMount the probe using the M8 x 1 thread and keep thread engagement at or below 12 mm. Tighten the probe case to 5.1 N·m recommended torque; never exceed 7.3 N·m. The miniature coaxial ClickLoc connector must be torqued to a maximum of 0.565 N·m to avoid damaging the gold-plated contacts.\u003c\/p\u003e\u003cp\u003ePlan cable routing with a minimum bend radius of 25.4 mm. A bend tighter than this can stress the FEP-insulated triaxial cable and change measurement readings. The compact 40 mm overall case length allows installation in bearing housings or probe mounts with limited clearance.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eRoutine inspection should focus on cable condition, connector torque, and probe tip contamination. The PPS tip resists many process fluids, but verify the tip face has no buildup that could alter the air gap. The AISI 304 stainless steel case provides corrosion resistance for most industrial environments.\u003c\/p\u003e\u003cp\u003eTemperature exposure requires particular attention. The probe's rated range is -35°C to +177°C, and the manual warns that exposing the probe below -34°C may cause premature failure of the pressure seal. Keep the probe away from sustained temperatures below -35°C, and check the cable bend radius after any maintenance.\u003c\/p\u003e\u003cp\u003eBecause the 330173-00-04-10-02-00 has a specified tensile strength of 222 N, pulling or twisting the lead beyond normal handling can damage the connection. Use strain relief during installation. For long-term reliability, compare output readings against baseline values after each scheduled shutdown.\u003c\/p\u003e\u003ch2\u003eTroubleshooting Common Issues\u003c\/h2\u003e\u003cp\u003eIf output voltage seems unstable, first confirm the supply voltage is between -17.5 Vdc and -26 Vdc. Operating at a more positive voltage than -23.5 Vdc can reduce the linear range. Supply sensitivity is less than 2 mV output change per volt input change, so a clean supply is essential for repeatable measurements.\u003c\/p\u003e\u003cp\u003eFor magnetic interference, the system can tolerate 60 Hz fields up to 300 Gauss. At a 50 mil gap, the probe itself contributes only 0.0014 mil pp\/gauss, while the XL Proximitor Sensor contributes 0.0131 mil pp\/gauss. Keep the sensor away from large AC transformers or bus bars to minimize ripple.\u003c\/p\u003e\u003cp\u003eIf the probe does not seat properly, check the thread engagement. Maximum engagement is 12 mm; exceeding this value can bind the probe and cause it to bottom out before reaching the target gap. Confirm the target is AISI 4140 steel when using the listed sensitivity values.\u003c\/p\u003e\u003cp\u003eFor ordering support and to confirm the exact configuration, PLC Source PRO can assist with the Bently Nevada 330173-00-04-10-02-00 before purchase.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44427415552099,"sku":"330173-00-04-10-02-00","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330173_a4cccb0f-46e5-482f-9686-7db9cadd0fbd.jpg?v=1785474147","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-330173-00-04-10-02-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}