{"product_id":"bently-nevada-330173-00-04-10-02-00-industrial-automation-module-1","title":"Bently Nevada 330173-00-04-10-02-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen machinery vibration threatens uptime, the Bently Nevada 330173-00-04-10-02-00 3300 5mm Probe delivers precise, reliable measurements. This eddy-current proximity probe, part of the 3300 series, is engineered for continuous monitoring of shaft vibration and position in critical rotating equipment. With a 1.0-meter cable and M8 x 1 thread, this unarmored probe is ready for installation in a wide range of industrial environments.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330173-00-04-10-02-00 offers performance-critical specifications for accurate readings:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Requires -17.5 Vdc to -26 Vdc at 12 mA maximum consumption. Operation at a more positive voltage than -23.5 Vdc can reduce linear range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Sensitivity:\u003c\/strong\u003e Less than 2 mV change in output voltage per volt change in input voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Resistance:\u003c\/strong\u003e 50 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance (1.0 m length):\u003c\/strong\u003e 7.59 ± 0.50 ohms from center conductor to outer conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 ohm triaxial, fluoroethylene propylene (FEP) insulated, available in 0.5, 1, 2, 5, or 9 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Temperature Range:\u003c\/strong\u003e -35°C to +177°C (-31°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.323 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise Vibration Monitoring:\u003c\/strong\u003e The 5mm probe size and 1.27 mm (50 mils) gap provide accurate shaft displacement readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e AISI 304 stainless steel case and PPS tip withstand harsh industrial conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Connectivity:\u003c\/strong\u003e Miniature coaxial ClickLoc connector ensures secure, stable signal transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Cable Lengths:\u003c\/strong\u003e Choose from 0.5 to 9 meters to suit your installation layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Resilience:\u003c\/strong\u003e Operates from -35°C to +177°C, suitable for demanding environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330173-00-04-10-02-00 is ideal for monitoring:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbines:\u003c\/strong\u003e Detect shaft vibration and eccentricity in steam and gas turbines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressors:\u003c\/strong\u003e Monitor rotor dynamics to prevent surge and damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePumps:\u003c\/strong\u003e Track shaft position and vibration in critical pumping systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotors \u0026amp; Generators:\u003c\/strong\u003e Ensure stable operation by measuring vibration and axial position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn each scenario, the probe provides real-time data that enables predictive maintenance, reducing unplanned downtime and extending equipment life.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation is crucial for accurate readings. Follow these guidelines:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Use the M8 x 1 thread to secure the probe. Recommended case torque is 5.1 N·m (45 in·lb), with a maximum of 7.3 N·m (65 in·lb). Maximum thread engagement is 12 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning:\u003c\/strong\u003e Maintain a gap of 1.27 mm (50 mils) to the target for optimal linear range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Handling:\u003c\/strong\u003e Avoid bending the cable below a 25.4 mm (1.0 in) radius to prevent signal degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Torque:\u003c\/strong\u003e Tighten connector-to-connector to a maximum of 0.565 N·m (0.42 ft·lbf).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe 330173-00-04-10-02-00 requires minimal maintenance, but regular inspection ensures long-term reliability:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCheck cable integrity and connector tightness periodically.\u003c\/li\u003e\n\u003cli\u003eVerify that the probe tip remains clean and free of debris.\u003c\/li\u003e\n\u003cli\u003eMonitor temperature—exposing the probe below -34°C (-30°F) may cause premature seal failure.\u003c\/li\u003e\n\u003cli\u003eConfirm that the probe case is not subjected to excessive torque beyond 7.3 N·m.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBy following these steps, you maximize the probe's service life and measurement accuracy.\u003c\/p\u003e\u003ch2\u003eCompatibility \u0026amp; Integration\u003c\/h2\u003e\u003cp\u003eThis probe is designed to work with Bently Nevada 3300 series monitoring systems, including the XL Proximitor sensor and extension cables. It uses a standard miniature coaxial ClickLoc connector, ensuring easy integration with existing Bently Nevada systems.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen ordering the Bently Nevada 330173-00-04-10-02-00, verify the following:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConfirm the cable length (1.0 meter) matches your installation requirement.\u003c\/li\u003e\n\u003cli\u003eEnsure the probe thread (M8 x 1) fits your mounting hole.\u003c\/li\u003e\n\u003cli\u003eCheck that your monitoring system supports 5mm probes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor reliable sourcing, choose PLC Source PRO for genuine parts and fast delivery.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44454815629411,"sku":"330173-00-04-10-02-00","price":237.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330173_f96604e2-02c8-4561-98ff-af96672757a9.jpg?v=1786157367","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-330173-00-04-10-02-00-industrial-automation-module-1","provider":"PLC Source PRO","version":"1.0","type":"link"}