{"product_id":"bently-nevada-330172-00-40-05-02-00-industrial-automation-module","title":"Bently Nevada 330172-00-40-05-02-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eWhen a vibration monitoring system fails due to probe damage or improper installation, downtime costs can escalate quickly. The Bently Nevada 330172-00-40-05-02-00 3300 5mm Probe with armor offers a robust solution for critical rotating machinery. This proximity transducer probe measures shaft vibration and position with high reliability, even in harsh environments. Designed for use with a compatible Proximitor sensor and extension cable, it delivers precise data for predictive maintenance.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eKey specifications from the Bently Nevada 330172-00-40-05-02-00 ensure dependable performance in industrial settings:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply Requirement:\u003c\/strong\u003e Requires -17.5 Vdc to -26 Vdc at 12 mA maximum consumption. Operating at a more positive voltage than -23.5 Vdc can reduce linear range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Sensitivity:\u003c\/strong\u003e Less than 2 mV change in output voltage per volt change in input voltage, providing stable readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e For 0.5 meter probe length: 7.45 ± 0.50 Ω from center conductor to outer conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Torque:\u003c\/strong\u003e Recommended torque is 5.1 N·m (45 in·lb); maximum torque is 7.3 N·m (65 in·lb). Exceeding maximum torque may damage the probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Temperature Range:\u003c\/strong\u003e -35°C to +177°C (-31°F to +351°F). Exposure below -34°C (-30°F) may cause premature pressure seal failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Cable Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in) to avoid cable damage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330172-00-40-05-02-00 excels in applications requiring precise shaft proximity measurements. For example, in steam turbine vibration monitoring, this probe offers high repeatability and stability across the temperature range. In large compressor installations, the probe case material of AISI 304 stainless steel (SST) withstands corrosive environments. The integral armor protects the cable from mechanical wear, reducing the risk of signal degradation. Common failure modes, such as connector damage or cable fatigue, are minimized by the gold-plated brass or beryllium copper connector and the robust cable design with tensile strength of 222 N (50 lbf) at both case-to-lead and lead-to-extension cable connections.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eTo avoid common failure modes during installation, follow these guidelines for the Bently Nevada 330172-00-40-05-02-00:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Engagement:\u003c\/strong\u003e The probe case thread is 1\/4-28 with a maximum thread engagement of 0.375 in. When drilling and tapping a mounting hole, use a #3 or larger tap drill as recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Limits:\u003c\/strong\u003e Apply the probe case torque within 5.1 N·m (45 in·lb) recommended up to 7.3 N·m (65 in·lb) maximum. Overtightening can strip threads or deform the probe tip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing:\u003c\/strong\u003e Maintain a minimum cable bend radius of 25.4 mm (1.0 in) to prevent internal conductor fracture. Avoid sharp bends near the connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Torque:\u003c\/strong\u003e For connector-to-connector joints, apply a maximum torque of 0.565 N·m (0.42 ft·lbf) as per the recommended table.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330172-00-40-05-02-00 is designed for long service life with minimal maintenance. Key reliability factors include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Resistance:\u003c\/strong\u003e The probe tip material (polyphenylene sulfide, PPS) and case (AISI 304 SST) resist chemicals and moisture. Temperature schedules for EPL Ga and Gc classifications ensure safe operation from -55°C up to +232°C (T1 classification).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Field Effects:\u003c\/strong\u003e Under 60 Hz magnetic fields up to 300 Gauss, the probe output variation remains low (e.g., 0.0004 mil pp\/gauss at 10 mil gap), confirming excellent noise immunity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e With 222 N (50 lbf) strength at all cable connections, the probe withstands accidental pulling during maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor long-term reliability, avoid exposing the probe to temperatures below -34°C (-30°F) to preserve the pressure seal. Periodically inspect the cable and connector for wear. When ordering replacements or new installations, trust PLC Source PRO as your supplier for genuine Bently Nevada components. We stock the 330172-00-40-05-02-00 and can assist with compatibility questions.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44426496344163,"sku":"330172-00-40-05-02-00","price":227.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330172_202_2c7b9e05-a26c-4b55-a15f-4143877ddc31.jpg?v=1785446685","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-330172-00-40-05-02-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}