{"product_id":"bently-nevada-330171-00-20-10-02-00-industrial-automation-module-1","title":"Bently Nevada 330171-00-20-10-02-00 Product Overview \u0026 Specs","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330171-00-20-10-02-00\u003c\/strong\u003e is a 3300 5mm probe built with a 1\/4-28 UNF thread and no armor. This configuration includes a 0 in unthreaded length, a 2.0 in overall case length, and a 1.0 metre (3.3 feet) total length with a miniature coaxial ClickLoc connector. The probe uses a polyphenylene sulfide (PPS) tip and an AISI 304 stainless steel case, making it a dependable choice for proximity sensing in industrial automation environments. Every unit is made in the U.S.A.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer \/ Part Number\u003c\/td\u003e\n\u003ctd\u003eBently Nevada 330171-00-20-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e330171 3300 5mm Probe, 1\/4-28 UNF thread, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Thread\u003c\/td\u003e\n\u003ctd\u003e1\/4-28; maximum thread engagement 0.375 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirement\u003c\/td\u003e\n\u003ctd\u003e-17.5 Vdc to -26 Vdc at 12 mA maximum consumption; operation above -23.5 Vdc can reduce linear range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Sensitivity\u003c\/td\u003e\n\u003ctd\u003eLess than 2 mV change in output voltage per volt change in input voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC Resistance (1.0 m)\u003c\/td\u003e\n\u003ctd\u003e7.59 ± 0.50 Ω from center conductor to outer conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable\u003c\/td\u003e\n\u003ctd\u003e75 Ω triaxial, FEP insulated; this unit uses 1.0 m length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e222 N (50 lbf) probe case to lead; 222 N (50 lbf) probe lead to extension cable connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Material\u003c\/td\u003e\n\u003ctd\u003eGold-plated brass or gold-plated beryllium copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Torque\u003c\/td\u003e\n\u003ctd\u003e5.1 N·m recommended; 7.3 N·m maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector-to-Connector Torque\u003c\/td\u003e\n\u003ctd\u003e0.565 N·m maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Cable Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-35°C to +177°C (-31°F to +351°F); exposure below -34°C may cause pressure seal failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.323 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approval Option\u003c\/td\u003e\n\u003ctd\u003e00 = Not Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFailure-Mode Engineering: Why This Probe Holds Up\u003c\/h2\u003e\u003cp\u003eProximity probes most often fail at mechanical or environmental stress points. The \u003cstrong\u003eBently Nevada 330171-00-20-10-02-00\u003c\/strong\u003e addresses these risks with a PPS tip, an AISI 304 stainless steel case, and a 1\/4-28 thread. The manufacturer specifies a maximum thread engagement of 0.375 in, so installers can avoid bottoming out the probe. Keep probe case torque at 5.1 N·m recommended and never exceed 7.3 N·m. For the cable connector, the maximum connector-to-connector torque is 0.565 N·m.\u003c\/p\u003e\u003cp\u003eThermal stress is another common failure cause. This Bently Nevada 330171-00-20-10-02-00 probe operates from -35°C to +177°C; exposing it below -34°C can damage the pressure seal. Maintaining the minimum 25.4 mm cable bend radius also prevents internal conductor damage.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe 330171-00-20-10-02-00 suits noncontact position and gap measurement in industrial machinery packages. With an AISI 4140 steel target and a probe gapped at 1.27 mm (50 mils), the system provides stable performance in the +18°C to +27°C temperature band defined by the manufacturer.\u003c\/p\u003e\u003cp\u003eFacilities that need a compact 1.0 m cable run can use this probe in proximity transducer systems connected through the miniature coaxial ClickLoc connector. The PPS tip and stainless steel case allow installation where elevated temperature or mechanical wear would damage less robust sensors.\u003c\/p\u003e\u003ch2\u003eInstallation and Setup Guidance\u003c\/h2\u003e\u003cp\u003eDrill and tap the mounting hole for the 1\/4-28 UNF thread using a #3 or larger tap drill. Keep thread engagement at or below 0.375 in to prevent the probe from contacting the target. Apply 5.1 N·m of probe case torque as a target and do not exceed 7.3 N·m.\u003c\/p\u003e\u003cp\u003eRoute the FEP-insulated triaxial cable with a bend radius of at least 25.4 mm. Verify the connector is seated correctly; the ClickLoc design is intended for a standard cable. When tightening the connector-to-connector joint, stay within the 0.565 N·m maximum torque.\u003c\/p\u003e\u003ch2\u003eMaintenance and Reliability\u003c\/h2\u003e\u003cp\u003eInspect the probe cable and connector regularly for abrasion, sharp bends, or loose connections. The \u003cstrong\u003eBently Nevada 330171-00-20-10-02-00\u003c\/strong\u003e has a 222 N tensile strength rating at the probe case-to-lead joint, so routine handling should not overstress the cable if the route is protected.\u003c\/p\u003e\u003cp\u003eMonitor ambient temperature. Repeated operation at the upper boundary of the -35°C to +177°C range can accelerate seal aging; staying above -34°C is also critical to avoid pressure seal failure. Keep the probe gap stable and verify the mounting thread has not loosened during service.\u003c\/p\u003e\u003ch2\u003eSelection Guide and Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore ordering, confirm that the 330171-00-20-10-02-00 matches your system needs. The part number identifies the 3300 5mm probe with 1\/4-28 UNF thread, no armor, 0 in unthreaded length, 2.0 in overall case length, 1.0 m cable, ClickLoc connector, and no agency approval requirement.\u003c\/p\u003e\u003cp\u003eCheck the required cable length and mounting geometry, and confirm the target material is compatible with the specified AISI 4140 steel test target. For a ready-to-ship Bently Nevada 330171-00-20-10-02-00, order through PLC Source PRO.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44427368431715,"sku":"330171-00-20-10-02-00","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330171_202_dd437a31-f012-4c5c-be41-bd31886a5550.jpg?v=1785473523","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-330171-00-20-10-02-00-industrial-automation-module-1","provider":"PLC Source PRO","version":"1.0","type":"link"}