{"product_id":"bently-nevada-330171-00-12-10-01-cn-industrial-automation-module","title":"Bently Nevada 330171-00-12-10-01-CN Industrial Automation Module","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330171-00-12-10-01-CN is a 5mm proximity probe designed for reliable vibration and displacement measurement in industrial rotating machinery. Part of the 3300 series, this probe features a 1\/4-28 UNF thread without armor, a 1.0-meter cable, and a miniature coaxial ClickLoc connector with a connector protector. Manufactured in the U.S.A., it offers robust performance in demanding environments.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe following specifications are for a proximity transducer system operating between +18°C and +27°C with a -24 Vdc power supply, a 10 kW load, an AISI 4140 steel target, and a probe gapped at 1.27 mm (50 mils).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Requires -17.5 Vdc to -26 Vdc at 12 mA maximum consumption. Operation at a more positive voltage than -23.5 Vdc can reduce linear range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e Less than 2 mV change in output voltage per volt change in input voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Resistance:\u003c\/strong\u003e 50 Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e For a 1.0-meter probe, resistance from center conductor to outer conductor is 7.59 ± 0.50 Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω triaxial, fluoroethylene propylene (FEP) insulated, available in lengths of 0.5, 1, 2, 5, or 9 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Temperature Range:\u003c\/strong\u003e -35°C to +177°C (-31°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.323 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eReal-World Applications\u003c\/h2\u003e\u003cp\u003eThis probe is ideal for vibration monitoring in steam turbines, centrifugal compressors, pumps, and fans. The Bently Nevada 330171-00-12-10-01-CN provides precise gap measurements, enabling early detection of shaft orbit changes and bearing wear. In chemical processing plants, its PPS tip and stainless steel case resist corrosion, while the ClickLoc connector ensures secure signal transmission in high-vibration areas.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eMount the probe using a 1\/4-28 threaded hole. For a 1\/4-28 probe, a #3 or larger tap drill is recommended. The maximum length of thread engagement is 0.375 inches. The probe case torque should be 5.1 N·m (45 in·lb) recommended, with a maximum of 7.3 N·m (65 in·lb). The connector-to-connector torque maximum is 0.565 N·m (0.42 ft·lbf). Ensure the cable bend radius does not exceed 25.4 mm (1.0 in) to prevent damage.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eOperate within the temperature range -35°C to +177°C. Exposure below -34°C may cause premature failure of the pressure seal. The probe case and lead have a tensile strength of 222 N (50 lbf). Regularly inspect the cable and connector for wear. The gold-plated brass or beryllium copper connectors provide reliable electrical contact over time.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen ordering, ensure the unthreaded length option (00 = 0 in), overall case length (12 = 1.2 in), total length (10 = 1.0 meter), and connector option (01 = miniature coaxial ClickLoc with standard cable) match your system requirements. The agency approval option CN indicates country-specific approvals. For further assistance, PLC Source PRO offers expert support for this and other Bently Nevada parts.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44426328375395,"sku":"330171-00-12-10-01-CN","price":226.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330171_202_fb0c4783-5d64-4678-99db-ca21d7837800.jpg?v=1785441278","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-330171-00-12-10-01-cn-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}