{"product_id":"bently-nevada-330141-08-90-02-05-industrial-automation-module","title":"Bently Nevada 330141-08-90-02-05 Industrial Automation Module","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eWhen probe reliability is critical for vibration monitoring in rotating machinery, the Bently Nevada 330141-08-90-02-05 delivers proven performance. This 3300 XL 8 mm probe with armor is engineered to withstand harsh industrial environments. It features patented TipLoc and CableLoc technologies that address common failure modes such as probe tip separation and cable pull-out, ensuring dependable operation in demanding applications.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications Breakdown\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330141-08-90-02-05 is a 3300 XL 8 mm probe with a total length of 9.0 meters (29.5 feet) and an overall case length of 0.8 inches. It uses a miniature coaxial ClickLoc connector with standard cable and carries CSA, ATEX, and IECEx approvals. Key specifications include:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncremental Scale Factor (9m system)\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) ±6.5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeviation from best fit straight line (9m system)\u003c\/td\u003e\n\u003ctd\u003eLess than ±0.038 mm (±1.5 mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe tip material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe case material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 or 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard probe temperature range\u003c\/td\u003e\n\u003ctd\u003e−52°C to +177°C (−62°F to +350°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe weight\u003c\/td\u003e\n\u003ctd\u003e323 g\/m (11.4 oz\/m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable pull strength\u003c\/td\u003e\n\u003ctd\u003e330 N (75 lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThe probe provides a nominal DC resistance of 9.87 ±0.50 Ω for the 9.0-meter length. Its relative humidity performance shows less than a 3% change in Average Scale Factor when tested at 93% humidity per IEC 68-2-3 for up to 56 days.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330141-08-90-02-05 is widely used in steam turbines, gas compressors, centrifugal pumps, and large electric motors. Its robust construction and high incremental scale factor (7.87 V\/mm) deliver accurate shaft displacement measurements essential for predictive maintenance. The optional FluidLoc cable prevents oil leakage in lubricated machinery, reducing contamination risks.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eWhen installing the Bently Nevada 330141-08-90-02-05, ensure the probe tip is properly positioned within the specified linear range (0.25 mm to 2.0 mm gap). Use mounting brackets suited for 8 mm probes and avoid sharp bends in the cable. The patented CableLoc design provides 330 N pull strength, allowing secure cable routing. Always verify the system extension cable length matches the probe total length option (9.0 meters) to maintain calibration.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eRoutine inspection of the Bently Nevada 330141-08-90-02-05 includes checking the probe tip for wear or contamination, verifying cable integrity, and ensuring connectors are clean and tight. The PPS probe tip resists chemical attack, while the stainless steel case withstands corrosion. Avoid exposing the probe to temperatures below −34°C to protect the pressure seal. With proper care, this probe delivers consistent performance over extended service intervals, reducing total cost of ownership.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore purchasing the Bently Nevada 330141-08-90-02-05, verify that your system requires an 8 mm probe with a 9.0-meter cable and the specified approvals (CSA, ATEX, IECEx). Confirm compatibility with your Bently Nevada 3300 XL monitor or third-party vibration monitoring system. For a reliable source, consider PLC Source PRO, a trusted supplier of industrial automation spares.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44426305568867,"sku":"330141-08-90-02-05","price":267.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330141-08-10-02-05-1_9685a0cc-5205-4085-8705-54ca981d7b6c.jpg?v=1785439823","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-330141-08-90-02-05-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}