{"product_id":"bently-nevada-190501-08-00-00-industrial-automation-module","title":"Bently Nevada 190501-08-00-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 190501-08-00-00 Velomitor CT Velocity Transducer is a precision industrial automation module engineered for continuous vibration monitoring in rotating machinery. With a sensitivity of 3.94 mV\/mm\/s (±5%) and a frequency response from 3.0 Hz to 900 Hz (±1.0 dB), this transducer delivers accurate velocity measurements for predictive maintenance and asset protection. Its 316L stainless steel case and MIL-C-5015 connector ensure durability in harsh environments.\u003c\/p\u003e\u003ch2\u003eKey Technical Specifications\u003c\/h2\u003e\u003cp\u003eThis Bently Nevada 190501-08-00-00 transducer is built to perform under demanding conditions. Below are the critical parameters that define its operational capabilities:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 3.94 mV\/mm\/s (100 mV\/in\/s) ±5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 3.0 Hz to 900 Hz (180 to 54,000 cpm) ±1.0 dB; 1.5 Hz to 1.0 kHz (90 to 60,000 cpm) ±3.0 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Bias Voltage:\u003c\/strong\u003e 10.1 Vdc ± 1.0 Vdc (Pin A referenced to Pin B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Output Impedance:\u003c\/strong\u003e \u0026lt;400 Ω typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -40°C to +85°C (-40°F to +185°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock Limit:\u003c\/strong\u003e 5000 g pk, maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e 316L stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Torque:\u003c\/strong\u003e 4.5 N-m ± 0.6 N-m (40 in–lbf ± 5 in-lbf)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance and Reliability\u003c\/h2\u003e\u003cp\u003eThe 190501-08-00-00 delivers consistent performance with a broadband resolution of 0.229 mm\/s (0.009 in\/s) pk. Its base strain sensitivity is 0.43 mm\/s\/μstrain (0.017 in\/s\/μstrain), ensuring minimal interference from mechanical strain. Internal electronics are isolated from the case, reducing ground loop issues. With a maximum cable length of 305 meters (1,000 ft.) using part number 02173006, this transducer offers flexible installation options without signal degradation.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eIn rotating equipment such as turbines, compressors, and pumps, the Bently Nevada 190501-08-00-00 provides critical vibration data. Its wide frequency response and high shock tolerance make it suitable for:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePredictive maintenance programs:\u003c\/strong\u003e Continuous monitoring helps detect early bearing wear and imbalance, reducing unplanned downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance validation:\u003c\/strong\u003e Accurate velocity readings support machinery health assessments and commissioning tests.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarsh environment installations:\u003c\/strong\u003e With 100% condensing humidity tolerance and 316L stainless steel construction, it withstands corrosive and wet conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and Setup\u003c\/h2\u003e\u003cp\u003eMount the 190501-08-00-00 using the provided plate stud (3\/8-in 24 to 1\/2-in 20) with a torque of 4.5 N-m ± 0.6 N-m. Ensure the mounting surface is clean and flat. The MIL-C-5015 connection interface provides a secure, weatherproof connection. For optimal signal integrity, route the cable away from high-voltage lines and maintain the specified maximum cable length.\u003c\/p\u003e\u003ch2\u003eMaintenance and Longevity\u003c\/h2\u003e\u003cp\u003eRegularly inspect the transducer for physical damage and verify the mounting torque remains within specification. The sealed 316L stainless steel case protects internal components from moisture and contaminants, but periodic visual checks are recommended. With a storage temperature range of -40°C to +100°C, the unit remains stable during downtime.\u003c\/p\u003e\u003ch2\u003eSelection Guide\u003c\/h2\u003e\u003cp\u003eWhen integrating the Bently Nevada 190501-08-00-00 into your monitoring system, confirm your system's input impedance and power supply match the transducer's output bias voltage. For hazardous area applications, optional agency approvals (Ex ia IIC T4) are available for models with approval options 01 through 04. PLC Source PRO offers genuine Bently Nevada parts with fast shipping and expert support.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44436219068515,"sku":"190501-08-00-00","price":298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/190501-00-00-04__E5_89_AF_E6_9C_AC_241c2cdc-4d1f-49f3-8238-ecf104ac51d5.jpg?v=1785796836","url":"https:\/\/www.plcsourcepro.com\/he\/products\/bently-nevada-190501-08-00-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}