{"product_id":"bently-nevada-330910-01-07-10-01-00-industrial-automation-module","title":"Bently Nevada 330910-01-07-10-01-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview: Bently Nevada 330910-01-07-10-01-00 3300 NSv Proximity Probe\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330910-01-07-10-01-00 is a precision-engineered 3300 NSv proximity probe, part of the renowned Bently Nevada 3300 series. This industrial automation module is designed for reliable, continuous vibration and position monitoring in critical rotating machinery. As a direct upgrade to the legacy 3300 RAM probe, the 330910-01-07-10-01-00 offers enhanced chemical resistance and superior side-view characteristics, making it an ideal choice for demanding process compressor applications.\u003c\/p\u003e\u003cp\u003eThis specific configuration includes a 10 mm unthreaded length, 70 mm overall case length, and a 1.0 meter (39 in) total length. It features a miniature coaxial ClickLoc connector with connector protector and standard cable, ensuring a secure and reliable connection. The probe is manufactured to Bently Nevada's exacting standards, guaranteeing mechanical and electrical interchangeability with previous 3300 RAM systems.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications: Performance You Can Trust\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330910-01-07-10-01-00 delivers accurate, repeatable measurements across a wide range of operating conditions. Below are the key specifications that define its performance:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (60 mils), from 0.25 to 1.75 mm (10 to 70 mils) approximately -1 to -13 Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Gap Setting\u003c\/td\u003e\n\u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncremental Scale Factor (ISF)\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) +12.5%\/-20% including interchangeability error\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeviation from Best Fit Straight Line (DSL)\u003c\/td\u003e\n\u003ctd\u003eLess than ±0.06 mm (±2.3 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0 to 10 kHz: +0, -3 dB typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC Resistance (1.0 m length)\u003c\/td\u003e\n\u003ctd\u003e4.2 ± 0.5 ohms (center to outer conductor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Cable DC Resistance\u003c\/td\u003e\n\u003ctd\u003eCenter conductor: 0.220 Ω\/m; Shield: 0.066 Ω\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Cable Capacitance\u003c\/td\u003e\n\u003ctd\u003e69.9 pF\/m (21.3 pF\/ft) typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable\u003c\/td\u003e\n\u003ctd\u003e75 Ω coaxial, FEP insulated; lengths: 0.5, 1, 5, or 7 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Torque\u003c\/td\u003e\n\u003ctd\u003eFinger tight; maximum 0.56 N•m (5 in•lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Engagement (3\/8-24)\u003c\/td\u003e\n\u003ctd\u003eMaximum 0.563 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Weight (Probe)\u003c\/td\u003e\n\u003ctd\u003eApproximately 14 to 150 g (0.5 to 5.3 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eReal-World Applications: Where Precision Matters\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330910-01-07-10-01-00 excels in environments where reliable vibration and position monitoring are critical. Its enhanced chemical resistance and robust construction make it a top choice for:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess Compressors:\u003c\/strong\u003e The increased chemical resistance over the 3300 RAM probe allows use in harsh media, ensuring long-term stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbo Machinery:\u003c\/strong\u003e Monitor radial and axial shaft vibration, thrust position, and eccentricity in turbines, compressors, and pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Rotating Equipment:\u003c\/strong\u003e Suitable for any machine where proximity probing is required, including motors, gearboxes, and fans.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation is essential for accurate readings. Follow these practical guidelines:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Use the M10X1 thread for secure installation. Apply the recommended torque – finger tight, with a maximum of 0.56 N•m (5 in•lb) for the probe case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Use a three-conductor shielded triad cable for field wiring. The maximum length between the 3300 XL NSv Proximitor Sensor and the monitor is 305 meters (1,000 feet). Ensure correct polarity to avoid signal errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Setting:\u003c\/strong\u003e Set the initial gap to 1.0 mm (40 mils) to operate within the linear range. Verify the gap using a calibrated shim or the output voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Radius:\u003c\/strong\u003e Maintain a minimum bend radius of 25.4 mm (1.0 in) for the probe cable to prevent damage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330910-01-07-10-01-00 is designed for long service life with minimal maintenance. However, periodic inspection is recommended:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect Cable Integrity:\u003c\/strong\u003e Check for cuts, abrasions, or kinks in the probe cable, especially near the connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean Probe Tip:\u003c\/strong\u003e Keep the probe tip free of debris and contaminants to maintain accurate readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify Torque:\u003c\/strong\u003e Periodically check that the probe remains securely mounted, especially in high-vibration environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Exposure:\u003c\/strong\u003e The probe withstands extreme temperatures from -52°C to +177°C, but avoid exceeding these limits to prevent damage to the PPS tip or FEP insulation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility \u0026amp; Integration\u003c\/h2\u003e\u003cp\u003eThe 330910-01-07-10-01-00 is mechanically and electrically compatible with Bently Nevada's previous 3300 RAM proximity probe and extension cable, ensuring seamless integration into existing systems. It works with 3300 XL NSv Proximitor Sensors and can be used with a wide range of Bently Nevada monitors and diagnostic equipment. The miniature coaxial ClickLoc connector (option -01) provides a secure, quick-connect interface.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen selecting a replacement or new probe, verify the following to ensure compatibility:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type:\u003c\/strong\u003e Confirm the thread size (M10X1 in this configuration) matches your mounting requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Options:\u003c\/strong\u003e Ensure the unthreaded length (-01: 10 mm), overall case length (-07: 70 mm), and total length (-10: 1.0 m) meet your installation geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e The -01 option includes a miniature coaxial ClickLoc connector with protector – verify it matches your extension cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approvals:\u003c\/strong\u003e This unit has -00 (no agency approval), which is acceptable for most industrial applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor dependable sourcing and competitive pricing, consider PLC Source PRO as your trusted supplier for genuine Bently Nevada parts.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482813821027,"sku":"330910-01-07-10-01-00","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330910_279a2cec-458e-4cea-8020-9ab65ae56bf7.jpg?v=1786833914","url":"https:\/\/www.plcsourcepro.com\/ar\/products\/bently-nevada-330910-01-07-10-01-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}