{"product_id":"bently-nevada-330905-00-12-05-02-00-industrial-automation-module","title":"Bently Nevada 330905-00-12-05-02-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen machinery vibration threatens uptime, the \u003cstrong\u003eBently Nevada 330905-00-12-05-02-00\u003c\/strong\u003e 3300 NSv Proximity Probe delivers precise, reliable shaft displacement measurement. This industrial automation module is a direct replacement for legacy 3300 RAM probes, offering enhanced chemical resistance for demanding process compressor applications. Its side-view characteristics outperform the 3000-series 190 probe when gapping at the same distance from the target.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eKey parameters of the \u003cstrong\u003e330905-00-12-05-02-00\u003c\/strong\u003e include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 1.5 mm (60 mils), starting at 0.25 mm (10 mils) from target\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) ±12.5%\/-20%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL):\u003c\/strong\u003e \u0026lt; ±0.06 mm (±2.3 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0 to 10 kHz, +0\/-3 dB typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 4.0 ± 0.5 ohms (for 0.5 m length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThis probe excels in turbomachinery monitoring, particularly in process compressors where chemical exposure is a concern. Its compatibility with the previous 3300 RAM system allows seamless upgrades in existing installations. Use it for radial and axial shaft position monitoring, eccentricity measurement, and vibration analysis in critical rotating equipment.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eInstall the \u003cstrong\u003e330905-00-12-05-02-00\u003c\/strong\u003e with the recommended gap setting of 1.0 mm (40 mils). Use the supplied M10X1 thread and apply torque values: maximum 33.9 N•m (300 in•lb) on the probe case, but only finger tight for the recommended torque. Ensure the target surface is at least 8.9 mm (0.35 in) in diameter; for shafts under 13 mm (0.5 in), adjust gap to limit scale factor changes. Connect using the miniature coaxial ClickLoc connector and standard cable, with field wiring up to 305 meters (1,000 feet) using three-conductor shielded triad cable.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe probe tip is made of polyphenylene sulfide (PPS) and the case of AISI 304 stainless steel, ensuring durability in harsh environments. The Viton O-ring seals differential pressure between tip and case, but probes are not pressure-tested before shipment. For applications requiring pressure seal verification, contact our custom design department. The minimum bend radius of 25.4 mm (1.0 in) prevents cable damage during installation. Regular inspection of cable integrity and connector tightness will maximize service life.\u003c\/p\u003e\u003ch2\u003eCompatibility \u0026amp; Integration\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003e330905-00-12-05-02-00\u003c\/strong\u003e is mechanically and electrically interchangeable with Bently Nevada’s 3300 RAM probe and extension cable. It pairs with the 3300 XL NSv Proximitor Sensor and standard monitoring systems. The probe cable options include lengths of 0.5, 1, 5, or 7 meters, all with 75 Ω coaxial FEP insulation.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen ordering, verify the unthreaded length (00 mm), overall case length (120 mm), total length (0.5 m), and connector type (miniature coaxial ClickLoc). Confirm thread type (M10X1) and whether armor is needed. For reliable sourcing, \u003cstrong\u003ePLC Source PRO\u003c\/strong\u003e offers new, factory-packed units with a 12-month warranty.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482558918755,"sku":"330905-00-12-05-02-00","price":224.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330905-00-16-10-02-05_18a88a9f-bc9b-482d-97b1-00c70e8a2d5a.jpg?v=1786813588","url":"https:\/\/www.plcsourcepro.com\/ar\/products\/bently-nevada-330905-00-12-05-02-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}