{"product_id":"bently-nevada-330904-08-15-50-02-05-industrial-automation-module","title":"Bently Nevada 330904-08-15-50-02-05 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen precise shaft vibration and position monitoring are critical, the Bently Nevada 330904-08-15-50-02-05 3300 NSv Proximity Probe delivers reliable, repeatable measurements. This industrial automation module is part of the proven 3300 NSv series, designed for demanding turbomachinery and process compressor applications. The 330904-08-15-50-02-05 features an M8X1 threaded case, 80 mm unthreaded length, 150 mm overall case length, and a 5.0 meter (16.4 feet) total length with a miniature coaxial ClickLoc connector. It is supplied new and in original factory packing, backed by a 12-month factory warranty.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe 330904-08-15-50-02-05 offers a linear range of 1.5 mm (60 mils), starting at approximately 0.25 mm (10 mils) from the target. Its incremental scale factor (ISF) is 7.87 V\/mm (200 mV\/mil) with +12.5%\/-20% interchangeability error. Deviation from best fit straight line (DSL) is less than ±0.06 mm (±2.3 mils). Frequency response is 0 to 10 kHz with +0, -3 dB typical, supporting up to 305 meters (1000 feet) of field wiring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 5.3 ± 0.7 ohms (for 5.0 m length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable DC Resistance:\u003c\/strong\u003e Center conductor 0.220 Ω\/m (0.067 Ω\/ft), shield 0.066 Ω\/m (0.020 Ω\/ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Capacitance:\u003c\/strong\u003e 69.9 pF\/m (21.3 pF\/ft) typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap Setting:\u003c\/strong\u003e 1.0 mm (40 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating\/Storage Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThis proximity probe excels in radial vibration and axial position monitoring on rotating machinery such as compressors, turbines, and pumps. The 330904-08-15-50-02-05 is mechanically and electrically compatible with previous 3300 RAM probes, making it a direct replacement in existing systems. Its enhanced chemical resistance allows safe use in process compressor environments where aggressive media are present. Additionally, the side-view characteristics are superior to older 3000-series 190 probes, ensuring accurate gapping even in tight installations.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup\u003c\/h2\u003e\u003cp\u003eProper installation ensures optimal performance. Use the recommended torque of finger tight, with a maximum of 0.56 N•m (5 in•lb). For M8X1 probe cases, the maximum thread engagement is 12 mm. When routing the probe cable, maintain a minimum bend radius of 25.4 mm (1.0 in) to avoid damage. Field wiring should use a three-conductor shielded triad cable, with conductor sizes between 0.2 and 1.5 mm² (16 to 24 AWG). The maximum distance between the Proximitor Sensor and monitor is 305 meters (1000 feet).\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eRoutine inspection of the probe tip and cable is recommended to detect any physical damage or contamination. The PPS tip resists chemical attack, extending service life in harsh environments. The stainless steel case withstands corrosion. The probe is designed to seal differential pressure between tip and case using a Viton O-ring; however, it is not pressure tested before shipment. If your application requires a pressure seal test, contact our custom design department.\u003c\/p\u003e\u003ch2\u003eBuying Guide\u003c\/h2\u003e\u003cp\u003eBefore purchasing, verify your system requirements: probe thread size (M8X1), unthreaded length (80 mm), overall case length (150 mm), and total length (5.0 m). Confirm that the ClickLoc connector matches your extension cable. PLC Source PRO offers this genuine Bently Nevada 330904-08-15-50-02-05 with full factory warranty and fast worldwide shipping. Choose PLC Source PRO for authentic parts and expert support.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482416377955,"sku":"330904-08-15-50-02-05","price":296.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330904_202_ea1ce920-1382-42b0-9aed-8f3057de5ffa.jpg?v=1786807296","url":"https:\/\/www.plcsourcepro.com\/ar\/products\/bently-nevada-330904-08-15-50-02-05-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}