{"product_id":"bently-nevada-330904-00-10-05-12-00-industrial-automation-module","title":"Bently Nevada 330904-00-10-05-12-00 Industrial Automation Module","description":"\u003ch2\u003eBently Nevada 330904-00-10-05-12-00 3300 NSv Proximity Probe Overview\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330904-00-10-05-12-00 is a 3300 NSv proximity probe designed for reliable vibration and position monitoring in critical rotating machinery. This model features an M8X1 threaded case with armor, a 0.5-meter total length, and a miniature coaxial ClickLoc connector with FluidLoc cable. It offers enhanced chemical resistance compared to the previous 3300 RAM probe, making it ideal for process compressor applications.\u003c\/p\u003e\u003cp\u003eThis 330904-00-10-05-12-00 probe is mechanically and electrically interchangeable with earlier 3300 RAM probes, simplifying upgrades. Its side-view characteristics outperform the 3000-series 190 probe when gapped at the same distance from the target. With a linear range of 1.5 mm and an incremental scale factor of 7.87 V\/mm, it delivers precise measurements for condition monitoring.\u003c\/p\u003e\u003ch2\u003eKey Technical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC Resistance (RPROBE)\u003c\/td\u003e\n\u003ctd\u003e4.0 ± 0.5 ohms (0.5 m length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (60 mils), from 0.25 to 1.75 mm (10 to 70 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Gap Setting\u003c\/td\u003e\n\u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncremental Scale Factor (ISF)\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) +12.5%\/-20%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeviation from Best Fit Straight Line (DSL)\u003c\/td\u003e\n\u003ctd\u003eLess than ±0.06 mm (±2.3 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0 to 10 kHz: +0, -3 dB typical (up to 305 m field wiring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget Size (flat target)\u003c\/td\u003e\n\u003ctd\u003eMinimum 8.9 mm (0.35 in) diameter; recommended 13 mm (0.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable\u003c\/td\u003e\n\u003ctd\u003e75 Ω coaxial, FEP insulated (0.5, 1, 5, or 7 m lengths)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Torque\u003c\/td\u003e\n\u003ctd\u003e0.56 N•m (5 in•lb) recommended finger tight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Thread\u003c\/td\u003e\n\u003ctd\u003eM8x1, max engagement 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector-to-Connector Torque (M8X1)\u003c\/td\u003e\n\u003ctd\u003eMax 7.3 N•m (65 in•lb), recommended 5.1 N•m (45 in•lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eField Wiring and Extension Cable\u003c\/h2\u003e\u003cp\u003eFor installation, use a three-conductor shielded triad cable with 0.2 to 1.5 mm² (16 to 24 AWG) conductors, or 0.25 to 0.75 mm² (18 to 23 AWG) with ferrules. The maximum field wiring length between the 3300 XL NSv Proximitor Sensor and the monitor is 305 meters (1,000 feet). Longer runs may cause signal rolloff at high frequencies, so consult the frequency response graphs.\u003c\/p\u003e\u003cp\u003eThe extension cable has a DC resistance of 0.220 Ω\/m (center conductor) and 0.066 Ω\/m (shield), with a typical capacitance of 69.9 pF\/m.\u003c\/p\u003e\u003ch2\u003eInstallation and Setup Guidance\u003c\/h2\u003e\u003cp\u003eMount the 330904-00-10-05-12-00 probe with finger-tight torque, ensuring the M8X1 thread engages a maximum of 12 mm. Avoid exceeding 0.56 N•m to prevent damage. The probe is designed to seal differential pressure between tip and case using a Viton O-ring; however, it is not pressure tested before shipment. For applications requiring pressure seal verification, contact the manufacturer's custom design department.\u003c\/p\u003e\u003cp\u003eWhen positioning the probe, maintain the recommended gap of 1.0 mm (40 mils) from the target surface. For axial position measurements on shafts smaller than 13 mm (0.5 in) diameter, expect a change in scale factor; reducing the gap can help limit this effect.\u003c\/p\u003e\u003ch2\u003eMaintenance and Reliability\u003c\/h2\u003e\u003cp\u003eRegularly inspect the probe cable for bends exceeding the 25.4 mm minimum bend radius, as sharp bends can damage the internal coaxial conductor. The stainless steel case and PPS tip resist chemical attack, but verify the O-ring integrity during routine maintenance to preserve pressure sealing. The wide operating temperature range (-52°C to +177°C) suits harsh environments, yet thermal cycling may affect calibration—periodic verification of the scale factor is recommended.\u003c\/p\u003e\u003ch2\u003eCompatibility and Integration\u003c\/h2\u003e\u003cp\u003eThe 330904-00-10-05-12-00 is electrically and mechanically compatible with Bently Nevada's 3300 XL NSv Proximitor Sensor systems. It can replace older 3300 RAM probes directly. Use with standard Bently Nevada extension cables and monitors for seamless integration into existing vibration monitoring networks.\u003c\/p\u003e\u003ch2\u003eSelection Guide and Purchasing Advice\u003c\/h2\u003e\u003cp\u003eVerify that the probe length and connector type match your system requirements. The 0.5-meter total length with ClickLoc connector and FluidLoc cable suits tight installations. Confirm the target size meets the recommended minimum of 13 mm for accurate readings. For procurement, PLC Source PRO ensures authentic, factory-packed units with a 12-month warranty. Choose this 330904-00-10-05-12-00 for reliable performance in demanding process applications.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482135261283,"sku":"330904-00-10-05-12-00","price":227.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330904_202_428b6e27-4092-4f41-bb19-c7417c3cf646.jpg?v=1786793221","url":"https:\/\/www.plcsourcepro.com\/ar\/products\/bently-nevada-330904-00-10-05-12-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}