{"product_id":"bently-nevada-190501-02-00-01-industrial-automation-module","title":"Bently Nevada 190501-02-00-01 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 190501-02-00-01\u003c\/strong\u003e is a high-performance Velomitor CT Velocity Transducer designed for precise vibration monitoring in critical rotating machinery. As a key component of predictive maintenance systems, this industrial automation module delivers accurate velocity measurements essential for detecting imbalance, misalignment, and bearing wear before they lead to costly failures.\u003c\/p\u003e\u003cp\u003eManufactured in the U.S.A., the \u003cstrong\u003e190501-02-00-01\u003c\/strong\u003e features a 316L stainless steel case and a 2-pin MIL-C-5015 connector, ensuring durability in harsh industrial environments. With agency approvals including CSA\/NRTL\/C (Class I, Division 1) and ATEX\/IECEx\/CSA (Class I, Zone 0\/1), this transducer is certified for use in explosive atmospheres, making it a reliable choice for oil \u0026amp; gas, petrochemical, and power generation facilities.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003e190501-02-00-01\u003c\/strong\u003e offers outstanding performance metrics, as detailed below:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 3.94 mV\/mm\/s (100 mV\/in\/s) ±5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 3.0 Hz to 900 Hz (180 to 54,000 cpm) ±1.0 dB; 1.5 Hz to 1.0 kHz (90 to 60,000 cpm) ±3.0 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Bias Voltage:\u003c\/strong\u003e 10.1 Vdc ± 1.0 Vdc, Pin A referenced to Pin B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Output Impedance:\u003c\/strong\u003e \u0026lt;400 Ω typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadband:\u003c\/strong\u003e 0.229 mm\/s (0.009 in\/s) pk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Strain Sensitivity:\u003c\/strong\u003e 0.43 mm\/s\/μstrain (0.017 in\/s\/μstrain)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Cable Length:\u003c\/strong\u003e 305 metres (1,000 ft.) of cable (part number 02173006) with no degradation of signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -40°C to +85°C (-40°F to +185°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temperature:\u003c\/strong\u003e -40°C to +100°C (-40°F to +212°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock Limit:\u003c\/strong\u003e 5000 g pk, maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity Limit:\u003c\/strong\u003e 100% condensing, non-submerged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Field Susceptibility:\u003c\/strong\u003e \u0026lt;0.0068 mm\/s\/gauss (0.268 mil\/s\/gauss) @ 50 gauss, 50-60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e \u0026lt;297 g (10.5 oz.), typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Surface:\u003c\/strong\u003e 33 mm diameter (1.3 in diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 82 mm (3.2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e 316L stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e 2-pin 316L stainless steel MIL-C-5015, top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Torque:\u003c\/strong\u003e 4.5 N-m ± 0.6 N-m (40 in–lbf ± 5 in-lbf)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity:\u003c\/strong\u003e Pin A goes positive with respect to Pin B when velocity is from base to top of the transducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Angle:\u003c\/strong\u003e Any orientation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIntrinsic Safety Approvals (Agency Approval Options 01 through 04):\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntrinsically Safe:\u003c\/strong\u003e Ex ia IIC T4; Class I, Div 1, Groups A, B, C, D; Class II, Group E, F and G; Class III; AEx ia IIC T4; Install per drawing 167536; T4 @ -40°C ≤ Ta ≤ +100°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntrinsically Safe and NonIncendive:\u003c\/strong\u003e Ex nL IIC T4; Class I, Division 2, Groups A, B, C and D; AEx nA T4; Install per drawing 167536; T4 @ -40°C ≤ Ta ≤ +100°C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003e190501-02-00-01\u003c\/strong\u003e excels in demanding environments where reliable vibration monitoring is critical. Typical applications include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating Machinery Monitoring:\u003c\/strong\u003e Pumps, compressors, fans, and motors in continuous process industries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePredictive Maintenance Programs:\u003c\/strong\u003e Integrating with condition monitoring systems to schedule maintenance based on actual machine condition, reducing unplanned downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Area Installations:\u003c\/strong\u003e With its intrinsic safety certifications, the transducer is suitable for use in explosive atmospheres, ensuring safe operation in oil \u0026amp; gas and chemical plants.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBy providing accurate velocity data, the \u003cstrong\u003e190501-02-00-01\u003c\/strong\u003e enables early detection of mechanical faults, allowing maintenance teams to act before minor issues escalate into major failures. This proactive approach significantly improves asset reliability and extends equipment life.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation is essential for optimal performance. Follow these guidelines:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e The transducer can be mounted in any orientation. Use a stud mounting (3\/8-in 24 to 1\/2-in 20) for secure attachment. Ensure the mounting surface is clean and flat to achieve proper contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque:\u003c\/strong\u003e Apply a mounting torque of 4.5 N-m ± 0.6 N-m (40 in–lbf ± 5 in-lbf) to avoid over-torquing, which can damage the housing or affect sensitivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e The 2-pin MIL-C-5015 connector must be properly mated and locked to prevent signal loss. Use the specified cable (part number 02173006) for maximum signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing:\u003c\/strong\u003e Keep cable runs away from high-voltage lines and electromagnetic interference sources. The maximum cable length is 305 metres (1,000 ft.) with no signal degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity:\u003c\/strong\u003e Ensure correct wiring: Pin A goes positive with respect to Pin B when velocity is from base to top of the transducer. Verify the output bias voltage (10.1 Vdc ± 1.0 Vdc) at the monitoring system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003e190501-02-00-01\u003c\/strong\u003e is built for long-term reliability, but routine checks help ensure consistent performance:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeriodic Inspection:\u003c\/strong\u003e Inspect the mounting stud and connector for signs of loosening or corrosion. Re-torque if necessary within the specified range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Integrity:\u003c\/strong\u003e Check the cable for cuts, abrasion, or moisture ingress, especially in harsh environments. Replace if damaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Resistance:\u003c\/strong\u003e The 316L stainless steel case withstands corrosive atmospheres and can operate in 100% condensing humidity (non-submerged).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock and Vibration:\u003c\/strong\u003e The transducer handles shock up to 5000 g pk, making it resilient to transient impacts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRegular maintenance minimizes the risk of false readings and extends the service life of the transducer, contributing to lower total cost of ownership.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen selecting a replacement or new transducer, verify the following:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e Confirm the exact part number \u003cstrong\u003e190501-02-00-01\u003c\/strong\u003e to ensure compatibility with your monitoring system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e This configuration includes a stud mount (3\/8-in 24 to 1\/2-in 20). Ensure your installation site matches this requirement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e The MIL-C-5015 connection interface is standard; verify your cable assembly matches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approvals:\u003c\/strong\u003e The approval option 01 provides CSA\/NRTL\/C (Class I, Division 1) and ATEX\/IECEx\/CSA (Class I, Zone 0\/1) certifications. Confirm these meet your facility's safety requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor reliable sourcing, choose PLC Source PRO as your supplier. We offer genuine Bently Nevada components with verified specifications to ensure your operations run smoothly.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44436206452835,"sku":"190501-02-00-01","price":238.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/190501-00-00-04__E5_89_AF_E6_9C_AC_b59424a2-d983-4416-ad8a-1ad77f903b35.jpg?v=1785796299","url":"https:\/\/www.plcsourcepro.com\/ar\/products\/bently-nevada-190501-02-00-01-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}